mvanemmerik.com / Martin Guitars20 November 2026

THE ROAD SERIES / NEW ARRIVALS

One letter.
Two outlines.
A long-running partnership.

John Mayer’s OM-13E and OMC-13E bring his Martin signature models into the Road Series for the first time.

Find the differences in the spec sheet ↓
OM
13E / C
JOHN MAYER × MARTIN / 2026

25.4-inch scale · 1 11/16-inch nut
Two new models, shared dimensions.

The most useful part of a signature guitar announcement is often the least glamorous: the dimensions that survive from one model to the next. Martin’s November 10 launch preserves a familiar scale length and nut width while introducing two walnut-bodied acoustic-electrics.

What arrived

The OM-13E and cutaway OMC-13E are additions to the Mayer lineup, not a replacement announcement for the OMJM. Martin lists both new models at $1,999.99 USD in its launch release. That is the maker’s announced price, checked November 20, rather than a claim about every retailer or market.

What this page can tell you

This is a reading of the maker’s specifications and museum history, not a hands-on review. We can compare construction, materials and dimensions. We cannot turn those into a measured difference in volume, sustain or comfort. Martin’s descriptions of sound remain the manufacturer’s claims.

Open the specification sheet

Two published differences are easy to miss among the shared details. Switch on the highlighter to mark them. Every row stays visible.

Selected specifications from Martin’s two model pages
DetailOM-13EOMC-13E
Body formatDifferent000 14-fret000 14-fret cutaway
Top trimDifferentBold herringboneMulti-stripe
TopEngelmann spruceEngelmann spruce
Back / sidesBlack walnutBlack walnut
Scale25.4 inches25.4 inches
Nut width1 11/16 inches1 11/16 inches
Neck profilePerforming ArtistPerforming Artist
JointMortise & tenonMortise & tenon

Highlighter off. Read the two columns side by side.

The body descriptions above follow the specification tables even though the model names use OM. The graphic in the hero is an invented road case, not the included softshell case.

The C changes access

Martin describes the cutaway on the OMC-13E as a way to reach the upper frets more easily. Its table still lists 20 frets in total and a neck joining the body at the 14th fret. The cutaway does not add frets; it changes the space beside them.

The OMC specification also lists a satin neck finish against a gloss top, back and sides. Ebony is used for the fingerboard and bridge. Those are concrete construction details; whether the neck feels right is a separate, personal question.

Below the top

The OM-13E specification lists scalloped spruce X-bracing, with a 5/16-inch brace size. Its neck has a standard taper, and the bridge string spacing is 2 1/8 inches. These are different measurements describing different parts of the instrument; nut width alone is not a complete map of the playing surface.

The launch announcement confirms solid Engelmann spruce tops and solid black walnut backs and sides on both guitars. Both include Martin E1 electronics with an onboard tuner and a softshell case. No amplifier or recorded demo is needed to read those shared facts.

The dimensions have a history

Martin’s museum account traces the partnership to the OM-28 John Mayer. Former artist-relations director Dick Boak worked with Mayer on that first signature model. Its production run of 404 instruments referred to Atlanta’s area code, where Mayer was living.

2003

The first signature OM

The museum’s prototype has a 25.4-inch scale, a 1 11/16-inch nut and a Low Profile neck. Martin attributes the narrower nut and neck preference to Mayer.

2006

The OMJM follows

Martin’s current artist page dates the OMJM to 2006. The model remains part of the partnership’s lineup, alongside the newer Road Series entries.

2026

The Road Series chapter

The new pair retains those scale and nut dimensions but specifies a Performing Artist neck profile. Matching two numbers does not mean every aspect of the neck is identical.

The original prototype is in the Martin Museum in Nazareth, Pennsylvania, according to the company’s June 2025 account. That gives the current launch a useful historical reference: a physical instrument and documented measurements, rather than just a signature on a label.

A specification is the beginning

For now, the documented story is a new pair of Road Series models, a choice of cutaway, and a set of familiar dimensions carried into another construction recipe. The comparison does not rank them. It separates what is shared from what differs, leaving the listening and playing judgments where they belong: with an actual instrument.

Independent editorial coverage. No affiliation with C. F. Martin & Co. or John Mayer; no purchase recommendation. No copyrighted instrument artwork, signature inlays, logos or recordings are reproduced.

Sources

Five primary sources, read November 20, 2026. Product specifications and historical accounts are attributed to Martin; no quoted review judgments are used.

  1. Martin: November 10 launch announcement
  2. Martin: OM-13E specifications
  3. Martin: OMC-13E specifications
  4. Martin Museum: the original OM-28 prototype
  5. Martin: John Mayer partnership and model timeline